High Quality for Hepa Filter Paper - PU gule Two component Polyether polyols for air filters – Anya
High Quality for Hepa Filter Paper - PU gule Two component Polyether polyols for air filters – Anya Detail:
Instructions:
1. Material-A should stirred evenly with plastic hand electric drill, material-B can shake, before used.
2. Open the electrocaloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.
3. Wipe the mould with release agent
4. According to the local environment, such as the humidity in the air, workshop environment.
5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .
6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down
Product detail pictures:
Related Product Guide:
A Secret Behind the Whale’s Mighty Gulp | F7 Glassfiber Air Filter Paper
Blake Lively debuts growing baby bump on the red carpet of Pokemon Detective Pikachu | Folding Adhesive
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for High Quality for Hepa Filter Paper - PU gule Two component Polyether polyols for air filters – Anya , The product will supply to all over the world, such as: Guinea , Lyon , Algeria , Our company's main products are widely used all over the world; 80% of our products exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.
By Marina from Jordan - 2017.04.08 14:55
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Rae from Slovenia - 2017.07.07 13:00