Quality Inspection for Cellulose Hepa Filter Paper 0.3 Micron Hepa Air Filter Paper Roll - PU gule Two component Polyether polyols for air filters – Anya
Quality Inspection for Cellulose Hepa Filter Paper 0.3 Micron Hepa Air Filter Paper Roll - PU gule Two component Polyether polyols for air filters – Anya Detail:
Instructions:
1. Material-A should stirred evenly with plastic hand electric drill, material-B can shake, before used.
2. Open the electrocaloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.
3. Wipe the mould with release agent
4. According to the local environment, such as the humidity in the air, workshop environment.
5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .
6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down
Product detail pictures:
Related Product Guide:
Larson Electronics Releases Explosion Proof Rechargeable Battery Pack, 240V, 25A, (2) 50A SLA Batteries | Aluminum Frame
Raleigh Redux 2 Staple Edition | Folding Adhesive
We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for Quality Inspection for Cellulose Hepa Filter Paper 0.3 Micron Hepa Air Filter Paper Roll - PU gule Two component Polyether polyols for air filters – Anya , The product will supply to all over the world, such as: Rome , Uganda , Denmark , In order to meet our market demands, we have paied more attention to the quality of our products and services. Now we can meet customers' special requirements for special designs. We persistently develop our enterprise spirit "quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.
By Cheryl from Swaziland - 2017.04.28 15:45
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Elsa from New Delhi - 2018.09.23 17:37